How many Wi-Fi access points does an office need?
KINNEX Team5 min read
The usual mistake is to ask “how many square feet does one access point cover?” and divide. That answers a coverage question. In a working office the harder limit is usually capacity: how many people and devices are using Wi-Fi in the same space at the same time.
Two questions, not one
Coverage: is there a usable signal everywhere people work? This depends on the building: walls, glass, lifts, shelving and distance.
Capacity: can the access points serve everyone who is connected and active? This depends on the number of devices, what they do (video calls versus email) and how much airtime each access point can share.
You need enough access points for the larger of the two answers.
Estimating coverage
Open-plan floors with few walls need fewer access points than the same area divided into cabins. Concrete, brick, lifts, kitchens, glass partitions and filing storage all absorb or reflect signal. A rough drawing helps, but only a survey or a predictive design shows the effect of your own walls. The Wi-Fi heat map planner lets you draw walls by material and place access points to see the signal.
Estimating capacity
- Count the people in each zone at the busiest time.
- Multiply by devices per person. A laptop and a phone is common, and some people add a tablet.
- Think about the activity. Many people on video calls need far more capacity than the same number reading email.
- Divide by what one access point can serve comfortably. Maker data sheets quote client limits that are much higher than what feels good in daily use, so plan with a margin.
Meeting rooms and training rooms are the capacity hotspots. A room with twenty people on video calls may need its own access point.
Quick check on paper
Draw the floor on the heat map planner and add access points until every working area and every busy room is covered, then treat the count as a budget starting point and confirm it with a survey.
Placement matters as much as count
- Mount on the ceiling, in the open, away from metal and from corners where possible.
- Give each access point its own channel and a sensible power level. Higher power is not better; it makes devices stick to a distant access point.
- Feed each access point by a wired cable. Wireless backhaul shares the same radio and can cut capacity sharply.
- Check that the switch can supply enough PoE power for all of them. See PoE budget and switch sizing.
What to do next
Get a floor plan, mark the busy rooms, run the estimate and the heat map, and then walk the site with a test device before ordering. If you are choosing a Wi-Fi generation at the same time, read Wi-Fi 6, 6E and 7.