Planning tool
Fire alarm and PA planner
Upload a floor plan (PDF, DXF, DWG or image), set its scale, mark the areas to protect and place detectors, call points, sounders and speakers. The planner shows how far each reaches and what is left uncovered.
Method
What the planner works out
Reach of each device
- Smoke detector: about 7.5 m on a flat ceiling up to 10.5 m high.
- Heat detector: about 5.3 m.
- Manual call point: a walk of 30 m or less, shown as a straight-line ring.
- Ceiling speaker: a cone from its ceiling height, down to head height, at the angle you set.
- Sounder and horn: a nominal reach in open space.
Coverage of the areas you mark
Each marked area is sampled on a grid. A point counts as reached when it lies inside at least one device's circle, and the red wash shows what is not.
What it does not do
Reach is a straight-line distance that ignores walls, beams, partitions and ceiling voids, all of which reduce it. Sounder levels, zoning, cabling and the choice of detection are set by the fire code (the National Building Code of India) and the fire authority for the building, in a drawing made by a designer.
Use it for
A first count and layout for budgeting and for the conversation with a designer. See thefire detection estimate and thePA speaker sizing for quantities without a plan.
Your plan is saved in this browser only. Nothing is uploaded to KINNEX unless you choose to send it to us.