Planning tool
RAID capacity calculator
Know how much space you will actually get, how many drives can fail, and how long an array stays exposed during a rebuild.
Result
Usable space
40TB
36.4 TiB as an operating system shows it
Raw space
64TB
Space lost to protection
38%
Drives that can fail
2
Rebuild time
27.8h
One drive, at 80 MB/s
- Check:A rebuild takes about 28 hours, during which the array is exposed and slower. Keep a hot spare.
- Good:RAID protects against a failed drive, not against deletion, ransomware or fire. It is not a backup.
Method
How the numbers are worked out
Usable space
RAID 5 loses one drive to parity, RAID 6 two, and RAID 1 or 10 half. Hot spares sit idle until a drive fails, so they are taken off first.
Rebuild exposure
After a failure the array rebuilds onto a spare. Rebuild time is the drive size divided by the rebuild speed; the longer it is, the longer you rely on the remaining drives.
Assumptions and limits
- Capacity uses decimal terabytes as drive makers state them; the operating system reports binary TiB, about 9% lower.
- File system and controller overhead take a further small share.
- RAID is availability, not backup. Keep separate backups.
Related
Nothing you type here leaves your device unless you choose to send it to us. These are planning estimates; a survey or the equipment data sheet confirms the final figures.
Want an engineer to check it?
Send us what you worked out and we will come back with a design based on the real site.